Teal Elegance

This gown was custom designed for a client with a beautiful, dramatic hourglass figure for a formal event this autumn. She has a very difficult time finding clothing that flatters her figures, as most gowns that fit her bust and hips are far too loose for her narrow waist, making her look shapeless and larger than she is. She wanted a design that accentuated her waistline, and expressed an interest in a one-shoulder strap. I sent her sketches of several ideas, and the gown below was her favorite.

Birth of a Muslin

I spent a couple days this past week drafting the pattern and sewing up the muslin for a bridal gown I’ll be making in the near future. I thought I’d share the experience with my readers!

I pretty much always begin by sizing my dressform to my client’s measurements. This particular gown will be made for a plus sized gal with an hourglass figure, whose measurements were a bit larger than my adjustable dressform adjusts. I needed a good representation of her figure to be able to drape the bodice, and I didn’t want to swing for one of those deluxe uber adjustable dressforms just for the muslin. So, I cut 4″ wide strips of quilt batting and wrapped them around the form to pad it.  I had lots of control over *where* the extra padding went, and the batting is just fuzzy enough to sort of stick to itself which made it easy to put it on. Right after taking this snapshot, I took a roll of masking tape to it so I wouldn’t have to deal with the batting shifting each time I put the muslin onto and off of the dress form.

Once I was sure I had a good size and shape, I drew up the pattern for the bodice lining. For the lining I used a simple princess seamed strapless pattern, converted it to a sweetheart neckline, shortened and tapered the skirt. I left it a little longer than the final bodice would be, so I could draw out the asymmetrical line where the bodice attaches to the skirt in 3D, right up on my dress form. (It doesn’t show terribly well in the picture, but I drew my line straight on the muslin with a ballpoint pen). I also adjusted the back of the bodice, to allow for corset style lacing in the back. I drafted the skirt pieces and matched them up to the bodice to mark out the same angled lines for that seam.

Having removed the skirt pattern from the bodice lining, I moved on to draping the bodice itself. This was by far the most time consuming part of the process. I pinned muslin fabric straight onto the bodice lining, taking up small, irregular pintucks. I didn’t want the dress to look pleated, but rather to have a slightly random, organic look to the ruching, so I spent a lot of time undoing and redoing the pinning, twisting and stretching the fabric, until I had everything in place. Then after a strong blast of steam from my iron to set the wrinkles (and make them a tad less poofy), I had to carefully remove the pins from the lining, and replace them in the outer fabric, so I could take it over to my machine and stitch it down. Had to do this four times for the different sections of ruched fabric, then sew them together.

Once the bodice fabric was sewn together I attached it to the lining, and then sewed the skirt onto the bodice. Added the laces in the back, and there you have it, a muslin that gives a really good feel for what the final product will be!

Something Blue

Recently, I created a beautiful custom skirt for a lovely plus sized bride to wear to her wedding. She already owned a stunning tight lacing corset that had been custom made for her in a beautiful silvery blue silk dupioni fabric. She wanted to wear this corset on her wedding day, and I could easily see why! It had been beautifully made; the workmanship was just lovely. The corset brought in her waist by several inches and gave her a dramatic hourglass figure, and it had a romantic, almost fairy tale feel to it.

The bride presented this photo to me as an inspiration picture. She loved the lower portion of this bridal gown, and wanted a skirt made to look like that, from the piece of silk dupioni she had remaining after her corset had been made and chiffon fabric purchased to match. I could see that we needed to take great care for this; there was exactly 44″ by 100″ of the fabric remaining and it would take all of it to be able to make a skirt with the trumpet shape and train in the inspiration picture. I drafted the pattern carefully, and double and triple checked my pattern pieces to be sure they would fit within the available fabric piece. When she let me know her muslin needed a few adjustments to fit, I offered to create a second muslin before working with the silk – an extra step I don’t often take – because we wouldn’t have a second chance once I cut the silk. And I’m glad we did this – the final version of the pattern left less than a 1/4″ of allowance from the edge of the silk fabric. Absolutely all of it was needed!

Once the silk skirt was sewn up, I was able to drape the layered ruffles of chiffon fabric that sort of cascade down the skirt. I studied the inspiration picture at this point, to try to create a very similar shape and feel to the original, but proportioned for the skirt. This both required that the chiffon begin lower on the skirt than where her corset would sit, and that it be of a length to drape beautifully on a shorter and wider figure than the model in the inspiration picture.

I’m really proud of the end result on this item, and I think my client will look simply breathtaking on her wedding day!

Paisley Charmeuse Custom Dress

This dress was a lot of fun to make! The client is local to me, so we were able to meet in person to purchase fabrics and for her fittings. She needed a dress that was very modest to wear to a conservative church, but that still flattered her figure and reflected her personal sense of style. When she came to me, she had already spent a good amount of time looking through commercial dress patterns, and had fallen in love with Vogue 8408 for its dramatic, asymmetrical collar. So we started with the Vogue pattern, but altered from the original to have a narrower, pencil skirt, a closer fit through the waist, 3/4 sleeves with cuffs, and a longer skirt with a small side slit instead of the kickplate in the original design.

Strapless Silk Gown

This custom dress was created with beautiful hand dyed silk satin and silk crinkle chiffon fabrics. The strapless dress has boning through the bodice for support, and the skirt is finished with a machine rolled hem.

The Girl Back Home

My friend’s husband joined the army recently and he’s been away in Basic Training for the past couple of months. She hasn’t seen him at all, and has only gotten to speak to him a couple of times for brief intervals – about 15 minutes in the past two and a half months!

This coming week he graduates from Basic and she’ll get to visit him before he starts AIT. She asked me to make a new dress for her to wear when they go out, something beautiful and flattering to her newly-pregnant shape, something summery and comfortable. This is the custom dress I created. It has princess seams with godets below the hip for a full, swingy skirt. I cut it a little roomier than her current waist measurement, but with a tie back, so that she can adjust the fit depending on how much her figure changed between taking the measurements and seeing her husband. The hem falls just below knee length, and the sleeveless bodice should be comfortably cool in the summer heat.

Have a Happy Fourth of July everyone! My sincere thanks goes to all those fighting for our freedom, and for all the wives and children back home whose sacrifices are just as important.

Green Goddess

I’m so pleased with how this dress turned out! It’s so simple and elegant. The body is made of a hand dyed nylon lycra 4 way stretch fabric, and the two layer full circle skirt is made from a beautiful georgette fabric. The dress features off the shoulder sleeves, a wired hemline, and of course a built in body suit. Perfect for a standard or smooth ballroom dance!

Valerie Bridal Gown

Previously, I posted pictures from our bridal photo shoot showing off the two bridal veils I listed in my etsy shop (the beaded one sold already!), but I wanted to give a few details today about the gown itself, which is also available now.

Simple elegance and feminine beauty grace the bride wearing this beautiful gown. This dress is made from a splendid white Lamour Satin with a sweetheart neckline that sparkles with Swarovski rhinestones in Crystal AB and hand sewn glass beads. The strapless bodice has a self fabric facing with boning and sewn in bra cups for a secure fit and a beautiful feminine shape. The bodice flows smoothly into an A line skirt that ends in a chapel train. The entire gown is self lined with a second layer of satin, and it closes with an invisible zipper in the back.

The dress shown here is available in my etsy shop for immediate purchase! I am also taking orders for custom bridal and formal gowns at this time.

After Midnight

This sexy Latin number was so much fun to make! The super short skirt has a dramatic V shaped hemline with beautiful fringe for fantastic movment, and the top features padded bra cups and off the shoulder straps. And of course, it’s been positively COVERED in Swarovski rhinestones in Jet and Jet AB. There are about 8 gross of rhinestones on the bra cups alone!

What do you think? Is it over the top, or a fantastic choice to STAND OUT on the dance floor?

Ballroom dance WIP’s

Just thought I’d give you all a quick look at some of my recent activities. I’ll post better, modelled photos as I finish up these dresses, the rhinestones, etc.